High Chlorine Levels in Pool

chlorine levelsKeeping swimming pool chlorine at appropriate levels is extremely important. When chlorine levels are too high, swimmers can experience discomfort and even respiratory distress. On the other hand, when chlorine levels are too low, the chlorine cannot do its job. In this case, bacteria and other undesirable elements can get out of hand and cause hazards. Properly maintained chlorine levels produce a swimming pool that is both safe and pleasant.

It’s important to use chlorine correctly to be sure that microorganisms, bacteria, algae and other contaminants are kept under control. If these elements are allowed to build up inside of a pool filtration system, a biohazardous situation could result. Additionally, the pool filtration system could be damaged.

Chlorine eliminates microorganisms, algae and bacteria via a chemical reaction that occurs when the chlorine enters the pool water. At this point, it becomes a combination of hypochlorous acid (HCOI) and hypochlorite ion (OCI) which has the ability to destroy the cell walls of microscopic organisms. This eliminates the organisms and leaves pool water safe and clean.

Keeping the correct level of the chlorine in your swimming pool can be a balancing act. The wrong amount, whether too much or too little, can have a negative affect on the pH balance of the water. For this reason, it’s very important to keep close tabs on the pH balance as you adjust the chlorine levels.

In addition to balancing pH levels and chlorine levels, you must also balance the needs of your swimmers. Too little chlorine leaves them in danger of contaminated water. Too much chlorine causes itchy skin, irritated eyes, frazzled hair and destroyed swimsuits. There’s definitely a lot to keep in mind when adjusting chlorine levels!

For those who wish to try DIY swimming pool maintenance, there are a number of choices in types of swimming pool chlorine. You can consult with a swimming pool maintenance company to find out which type of chlorine – tablets, gas, liquid or granules – is most advisable for your pool setting.

Many DIY swimming pool owners prefer chlorine tablets. The reason for this is that this form of chlorine is very stable and easy to work with. Tablets contain both cyanuric acid and chlorine which dissolves slowly into the pool water. The idea behind this is that swimming pool protection will be steady, measured and ongoing.

Directions for handling chlorine tablets are quite simple. You just put the tablet into a chlorine feeder and allow it to dissolve slowly. Although chlorine tablets are easy to use, it is still quite important to follow directions. Remember that chlorine can be a dangerous chemical if improperly used.

Chlorine gas is generally dangerous, unstable and difficult to use. It is seldom if ever used in modern swimming pool care because it can actually make matters much worse rather than better. Chlorine gas tends to disrupt pH levels with great frequency due to high acid content.

Likewise, liquid chlorine is a dangerous, volatile, messy substance that is fairly unpopular for swimming pool maintenance. Although it does have the advantage of disbursing swiftly when added to the water, liquid chlorine is hazardous to use and difficult to store safely.

One of the most popular and practical forms of chlorine for DIY swimming pool owners is granulated chlorine. This substance is quite easy and relatively safe to handle. It dissolves quickly in the water and is well known for maintaining good pH levels. Like all forms of chlorine, it must be stored carefully to ensure safety.

Although chlorine is not outrageously expensive, it is important that you know what you’re doing when you use it. Each type of chlorine maybe especially used in particular circumstances. While a novice might go through a great deal of trial and error, and even make the situation worse in the process of attempting to correct a problem, a swimming pool service professional would have the knowledge and expertise to assess chlorine related problems quickly and easily and get them under control.

Accuracy in chlorine testing is of the utmost importance. While you may think that testing and adjusting your chlorine levels is a task you should be able to perform on your own, the fact is you’ll be much better off hiring a swimming pool service professional to assist you.

Having your own swimming pool is a big responsibility. Your pool can be a source of pride or a source of ongoing headaches and frustration. For maximum enjoyment as well as safety, it is highly recommended that pool owners engage the services of a professional for regular weekly pool service.

When you have your swimming pool professionally cared for, your equipment will last longer and you will have far fewer repair bills. Although this may seem like an excessive expense, when you consider the amount of security and safety provided by the services of professional, it’s easy to see that hiring a good pool Service Company is a great investment.

Adjusting chlorine levels and pH levels is just a small part of necessary routine weekly pool service. Investing in this professional service on a regular basis will leave you free of care and able to enjoy a sparkling clean pool running at its very best.

Related Posts:

One thought on “High Chlorine Levels in Pool

  1. This is worth knowing to have a healthy pool. To be honest I’m a bit aware about the chlorine content that is appropriate for pool depending the pool size or the water level, I’m just amazed how this reminds me about this matter again… Thanks for sharing!

Leave a Reply

Your email address will not be published. Required fields are marked *